Dumb Waiters (Service Elevators)
Dumb Waiters
These are designed to automatically handle from 100 to 250 Kgs of light material. Overall design and control depends on the floors served and the intensity of services. This is ideally suitable for library, canteen, kitchens & factories
Kindly browse and zoom through the picture gallery below to get a hint of our offerings.
| Capacity | Speed | Cabin.Dims | Shaft.Dims | Headroom | Serv. height |
|---|---|---|---|---|---|
| 50-150 | 0.25m/s | Width - 400-700 | +350 | 2900 OR | 750 OR |
| Depth - 400-700 | +200 | Door Ht | Lowest Floor | ||
| Height - 500-900 | +1250 | 1/2 Door ht. + 50 | |||
| +750 | |||||
| 200-300 | 0.25m/s | Width - 800-1000 | +400 | 2900 OR | 750 OR |
| Depth - 800-1000 | +250 | Door Ht | Lowest Floor | ||
| Height-900-1200 | +1250 | 1/2 Door ht. + 50 | |||
| +750 |
Attention
On cabin protection clear entrance dimensions resp. shaft dimensions will change Minimum floor to floor height on doors in line = 2 x door height + 250 mm
| Capacity | Speed | Cabin.Dims | Shaft.Dims | Headroom | Serv. height |
|---|---|---|---|---|---|
| 50-150 | 0.25m/s | Width - 400-700 | +350 | 2900 OR | 1/2 Door ht. + 150 |
| Depth - 400-700 | +200 | Door Ht | |||
| Height - 500-900 | +1250 | ||||
| +750 | |||||
| 200-300 | 0.25m/s | Width - 800-1000 | +350 | 2900 OR | 1/2 Door ht. + 150 |
| Depth - 800-1000 | +250 | Door Ht | |||
| Height-900-1200 | +1500 | ||||
| +750 |
Attention
On cabin protection clear entrance dimensions resp. shaft dimensions will change Minimum floor to floor height on doors in line = 2 x door height + 250 mm
| Capacity | Speed | Cabin.Dims | Shaft.Dims | Headroom | Serv. height |
|---|---|---|---|---|---|
| 50-150 | 0.25m/s | Width - 400-700 | +350 | 2900 OR | 1/2 Door ht. + 150 |
| Depth - 400-700 | +200 | Door Ht | |||
| Height - 500-900 | +1250 | ||||
| +750 | |||||
| 200-300 | 0.25m/s | Width - 800-1000 | +400 | 2900 OR | 1/2 Door ht. + 150 |
| Depth - 800-1000 | +250 | Door Ht | |||
| Height-900-1200 | +1500 | ||||
| +750 |
Attention
On cabin protection clear entrance dimensions resp. shaft dimensions will change Minimum floor to floor height on doors in line = 2 x door height + 250 mm